Phrozen Shuffle LCD 3D Printer (εκθεσιακός)

899,00 699,00 ME ΦΠΑ


Ο Phrozen Shuffle είναι ένας νέας γενιάς 3D εκτυπωτής ρητίνης που βασίζεται στην LCD τεχνολογία. Πατάει στα πολύ επιτυχημένα Phrozen Make και MakeXL με επιπλέον βελτιώσεις και πολύ πιο προσιτή τιμή! Κατάλληλος για κάθε χρήση, prototyping, μοντελισμό, κόσμημα, dental κλπ.

*Συνδυάζεται πολύ καλά με την Phrozen Grey Resin και για χυτεύσιμη με την Bluecast X5 LCD

Η κατασκευή του είναι πολύ λιτή αλλά στιβαρή, με μεγάλο build size (12*6.8*20cm), 10-100μm ανάλυση στον Z άξονα, 47μm στον XY με 2K LCD και το πρωτοποριακό που φέρνει σε σχέση με τον ανταγωνισμό σε αυτή την κατηγορία τιμής είναι:

1. το νέο ParaLED Optical engine με το οποίο ο UV Led φωτισμός καλύπτει όλη την επιφάνεια της LCD και είναι σχεδιασμένος ώστε το φως να προβάλεται ομοιόμορφα & κάθετα για πιο sharp εικόνα

2.η κατασκευή του κάθετου άξονα παρέχει μηδενικό backslash και Z axis wobbling  καθώς ακολουθεί τη σχεδίαση πιο ακριβών μοντέλων με Twin Linear Rail, Ball Screw, και Ball Bearing με μεταλλικό Aluminum-CNC φορέα κεφαλής.

Τέλος έχει έγχρωμη touch οθόνη για εύκολη χρήση είναι ανοιχτού λογισμικού με ελεύθερη χρήση οποιαδήποτε ρητίνης.

H τιμή αφορά εκθεσιακό μοντέλο σε άψογη κατάσταση με ελάχιστη χρήση



Κατηγορία: Ετικέτες: , , ,


The Prosumer Resin 3D Printer

The Phrozen Shuffle is the next generation prosumer resin 3D printer. This machine has adopted the good things from the earlier models Phrozen Make & MakeXL. On top of that Phrozen added their latest developments in 3D Printing technology. The Shuffle fuses all Phrozen’s knowledge & expertise into one more stable, mature and accurate 3D printing machine!

Unlike the sleek compact design of the Phrozen Make the Phrozen Shuffle has a relative simple but very functional design. Phrozen deliberately designed it with less  customized components, no fancy flip cover, also the case is slightly bigger in size. This way they managed to get the price lower while making the machine easier accessible for repairs, maintenance and mods. Phrozen focussed on functionality for shuffles design. They implemented the best Z-stage in its class and their unique ParaLED Optical engine. Resulting in the best printer in the entry level printer class.

Ettore Maria Bar-BleuCast First impression: finally a PRO 5.5 lcd printer at price of hobby one,Z axis is impressive, leadscrew is zero backslash, z arm is solid like CNC mill, vat quality is superior. Packaging was very good an tools are provided are not cheap quality. I see hard times for D7 and Photon…

Phrozen Self-Developed ParaLED Optical Engine

In optical systems for resin 3D printer, light intensity, wavelength, and optical path highly influences printing quality and efficiency. Conventional LCD 3D printer tends to use thumb-size COB LED with Fresnel film. This leads to a bad light uniformity where the light intensity is less in the edge areas. Their major target is to reduce the cost.

Phrozen’s ParaLED Optical Engine uses LED array matrix with the size same as LCD panel. Moreover, we narrow down the LED emission angle to make it as parallel as possible. That way, we can increase the efficiency that light pass through LCD and, therefore, improve printing speed and quality.

Phrozen Shuffle is the only entry level 3D Printer with a ParaLED array.


Twin Linear Rail, Ball Screw / Ball Bearing for Ultra-Stable Z-axis

Z axis wobbling is a big problem for most entry level resin 3D Printers. You will see Z-axis of many 3D printers are not fixed on top (or just simply put a cap on it).  Overall Z-axis design is based on simple optical axis and rail shaft. These will cause severe wobbling during 3D printing process, especially for large & high models. That’s why Phrozen team uses Twin Linear Rail, Ball Screw, and Ball Bearing with Aluminum-CNC part to on Phrozen Shuffle’s Z-axis. That can assure linearity and minimize impact of loaded force during the printing process. This concept has been widely verified in their previous model Phrozen Make XL, 8.9 inch LCD 3D Printer. 

Phrozen Shuffle summary

  • Uniform printing on the full buildplate
  • XY Resolution 47 µm. Suitable for detailed models, jewelry, and dental use
  • ParaLED LED Array with 90% optical uniformity, much better than conventional singel point source COB LED
  • 50W LED Array combined with uniform light angle for faster resin curing
  • 405 nm UV-LED. Works with most commercially available resin
  • Touch Screen control
  • USB port
  • Works standalone, no need for a dedicated PC.
  • Twin Linear Rail along with Ball Screw & Ball Bearing. Highly stable Z-axis, ZERO wobbling during printing.
  • 1 year warranty¹
  • Support by Phrozen, Facebook ForumOn-line Customer Service

Technical Specification

  • Printer Size: 28 * 28 * 42 cm
  • Printer Weight: 13 Kg
  • Printing Volume: 12 * 6.8 * 20 cm
  • XY Resolution: 47 µm
  • Z Resolution: 10 µm
  • Printing Speed: 30 mm per hour
  • Recommended Layer Height: 10 – 100 µm

In the box

  • Printer
  • Funnel
  • Gloves
  • Scraper
  • Resin wiper
  • Hexwrench



  • 3DHUB.gr is official Phrozen Reseller
  • 1 year warranty, excluding LCD Display, FEP Film and LED Array


Additional details

Screen Resolutiont: 2K

Recommended minimum thickness of the surfaces:> 0.4 mm

Connectivity: Eterneth, USB – Management software:Open

Printable materials: Resins 405 nm

Επιπρόσθετες Πληροφορίες

Βάρος 16 kg

Μπορεί επίσης να σας αρέσει…