Name: Phrozen Sonic Mighty Revo 16K
SKU: MIGHTYREVO14K-1
Availability: InStock

Phrozen Sonic Mighty Revo 16K

1.180,00€ ME ΦΠΑ

Availability: In Stock

SKU: MIGHTYREVO14K-1

Ο Phrozen Sonic Mighty Revo 16K είναι ένας υψηλής ανάλυσης ρητινο-εκτυπωτής (MSLA/LCD) που συνδυάζει εξαιρετική λεπτομέρεια εκτύπωσης με επαγγελματικά χαρακτηριστικά και σταθερότητα, κάνοντάς τον κατάλληλο για εργαστήρια, παραγωγή μικρής κλίμακας και απαιτητικές χομπίστες.

10.1″ 16K Resolution
Auto-Leveling
Residue & Failure Detection
Compatible with Phrozen Pump & Fill

Φυσικά με την εγγύση και υποστήριξη του 3DHUB, επίσημου αντιπροσώπου Phrozen Ελλάδα/Κύπρο. Περιλαμβάνονται κόστη εκτελωνισμόύ, φπα κλπ. Επικοινωνήστε μαζί μας για λεπτομέρειες!

Άμεση Διαθεσιμότητα!

Printing Technology	MSLA (LCD)
LCD	Mono LCD 10.1″
XY Resolution	14 × 19 μm (16K)
Light Source	405 nm / COB + Fresnel Lens
Slicing Software	Chitubox
Connectivity	USB, Wi-Fi, Ethernet
Operating Screen	5″
Layer Thickness	0.01-0.2 mm
Release Film	nFEP Film
Dimensional tolerance	XY Axis ±0.05 mm \| Z Axis≤0.2mm
Build Volume	211.68 x 118.37 x 235 mm
Printing Speed	Max. 676 Layers/hr
Rail	Dual Rails (Ball Screw)
Light intensity and light uniformity	3900-5900 u≥75%
Printer Size	353 x 345 x 517 mm
Printer Weight	18 kg

16K Resolution: Down to 0.02 mm Detail, Smooth Straight Off the Build Plate

From wing textures to facial expressions and armor engravings on 28 mm tabletop minis, details come out crisp so you spend less time post-processing. A 10.1-inch 16K LCD (15120 × 6230) pairs big-build capability with pinpoint precision throughout a 211.68 × 118.37 × 235 mm build volume.

Sonic Mighty Revo 16K LCD panel with purple light effect illustrating long panel life and heavy-use performance.

2,000+ Hours of LCD Panel Life: Built for Heavy Use

The upgraded LCD delivers higher light transmission, better heat resistance, and improved uniformity for more consistent results print after print. With an average lifespan of 2,000+ hours. That’s roughly 8+ months of printing at 8 hours a day.

Close-up of The Face of Evil resin model printed on Sonic Mighty Revo 16K showing smooth surface detail.

Print Smooth, Sand Less

Layer lines are fine enough to be virtually invisible at arm’s length. Prints come off the build plate looking clean and smooth with minimal post-processing. Even under close inspection, you’ll hardly see any layer lines.

14K vs. 16K: Smaller Pixels, Sharper Prints

Pixel size is reduced by about 36% (16.8 × 24.8 µm → 14 × 19 µm), delivering finer detail, smoother surfaces, and sharper edges on small-scale models.

Comparison graphic of Sonic Mighty Revo 14K and 16K LCD resolution showing smaller pixel area on 16K.

Your Studio’s Guardian: Notifies You the Moment Something Goes Wrong

Built-in 30°C chamber heater plus a multipoint pressure-sensing sensor monitors the entire print so you can run prints with more confidence and catch issues early.

Aerospace-Grade Aluminum Frame: Built for Heavy Use with Rock-Solid Stability

Dual linear rails, a ball screw, and a rigid 6000-series aluminum frame work together to keep motion steady and layers consistent. Even on 12+ hour runs, the Z-axis stays exceptionally precise, so tall prints and heavier parts form cleanly layer by layer, with a reduced risk of layer shifting.

Sonic Mighty Revo 16K interior showing dual linear rails, ball screw, and full metal frame for stable printing.

Steady Heater for More Reliable Prints

The built-in heater warms up to 30°C in about 30 minutes and holds a consistent temperature to help reduce print failures in colder spaces like garages or basements, especially during winter.

Built-In Heater

Preheat 30 Minutes Before Printing

Maintain 30°C During Printing

Sonic Mighty Revo 16K built-in heater with circulating airflow for stable resin temperature and clean curing.

Circulating heat keeps temperature stable, helping every layer cure cleanly for flawless results.

Smart Sensors, Stress-Free Prints

Assisted Leveling

Quickly resolves calibration errors so you can go from unboxing to your first print in as little as 10 minutes.

Sonic Mighty Revo 16K foreign object detection showing paused print and alert for debris on the LCD.

Foreign Object Detection (≥ 4 mm)

If the sensors detect an object ≥ 4 mm on the LCD, the printer automatically pauses to help protect the release film.

Sonic Mighty Revo 16K part detachment alert showing failed print detection and on-screen notification.

Part Detachment Alert (15 Layers)

If peel force reads zero for 15 consecutive layers, you will get an instant notification.* *Triggered when the build plate is no longer submerged in resin.