Bambu High Flow Hotend - H2 Series - 3DHUB.gr - Το πρώτο 3D printing HUB στην Ελλάδα!

Bambu High Flow Hotend – H2 Series

56,90€ ME ΦΠΑ

Availability: In Stock

SKU: BAMBUH2HFHOTEND

Bambu High Flow Hotend – H2 Series with Nozzle στο 3DHUB! Το αυθεντικό Bambu H2D hotend μαζί με ακροφύσιο σε 3 διαμέτρους! Συμβατό με H2 series Bambulab 3D printers!

Καλεστε μας και για άλλα Bambu ανταλλακτικά, υπάρχει διαθεσιμότητα σε πολλά που δεν έχουν ανέβει ακόμα στο eshop!

Bambu High Flow Hotend – H2 Series with Nozzle στο 3DHUB!

Real High Flow: Save Up to 30% of Your Time

The Bambu High Flow Nozzle’s optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%¹ higher max volumetric speed and reducing print time by up to 30%² with ease. The larger your model, the more time you save—especially for prints with extensive infills.

1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.

	PLA Basic	PLA Matte	PETG HF
Bambu Hardened Steel Nozzle (0.4mm)	24 mm³/s	28 mm³/s	24 mm³/s
Bambu High Flow Nozzle (0.4mm)	40 mm³/s	48 mm³/s	32 mm³/s
Bambu High Flow Nozzle (0.6mm)	40 mm³/s	40 mm³/s	40 mm³/s
Bambu High Flow Nozzle (0.8mm)	40 mm³/s	40 mm³/s	40 mm³/s

High-Speed Precision: Sharp Details Every Time

Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu’s high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.

Upgrade now and print faster without compromise!

Printer Compatability

H2 Series	X1/P1 Series	A1 Series
Supported	Not Supported	Supported*

*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.

Filament Compatibility

Filament	0.4 mm High Flow Hardened Steel	0.6 mm High Flow Hardened Steel	0.8 mm High Flow Hardened Steel
PLA Basic	√	√	√
PLA Matte	√	√	√
PLA Basic Gradient	√	√	√
PLA Silk+	√	√	√
PLA Silk Dual Color	√	√	√
PLA Silk	√	√	√
PLA Metal	√	√	√
PLA Marble	√	√	√
PLA Sparkle	√	√	√
PLA Wood	√	√	√
PLA Galaxy	√	√	√
PLA Glow	√	√	√
PLA-CF	Not recommended	√	√
PLA Aero	√	√	√
PETG HF	√	√	√
PETG Translucent	√	√	√
PETG-CF	Not recommended	√	√
ABS	√	√	√
ABS-GF	√	√	√
ASA	√	√	√
ASA Aero	√	√	√
ASA-CF	Not recommended	√	√
PC	√	√	√
PC FR	√	√	√
TPU for AMS	√	√	√
TPU 95A HF	√	√	√
TPU 85A	X	X	X
TPU 90A	X	X	X
PAHT-CF	Not recommended	√	√
PET-CF	√(Only for Left Hotend)	√(Only for Left Hotend)	√(Only for Left Hotend)
PA6-CF	Not recommended	√	√
PPA-CF	√(Only for Left Hotend)	√(Only for Left Hotend)	√(Only for Left Hotend)
PPS-CF	√(Only for Left Hotend)	√(Only for Left Hotend)	√(Only for Left Hotend)
Support for ABS	√	√	√
Support for PLA/PETG	√	√	√
Support for PA/PET	√	√	√
Support for PLA (New Version)	√	√	√
PVA	√	√	√
PA6-GF	Not recommended	√	√

Learn more about filament compatibility on Bambu Lab Wiki.

Quick Swap Nozzle Design

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.