BambuLab ASA Aero Filament 1kg
54,90€ ME ΦΠΑ
Product Features
- Tough with Good Impact Resistance
- Ultra-lightweight & Low Density
- Water & UV Resistance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75 mm +/- 0.03 mm
Cautions for Use
- AMS 2 Pro, AMS HT & AMS Compatible
- AMS lite NOT Compatible
- Enclosed Printer Required
- Dry Out Before Use
Bambu ASA Aero
Impact Resistance & Built to Last
Compared with other foaming filament, ASA Aero is tougher with higher layer strength, making it more resistant to impact, collision, and falling, perfect for high-stress demanding applications.
| Bambu ASA Aero | Bambu PLA Aero | PLA Wood | |
|---|---|---|---|
| Toughness (Impact Strength – XY) | 32.0 kJ/m² | 24.5 kJ/m² | 7.9 kJ/m² |
| Layer Adhesion (Impact Strength – Z, Dry State) | 3.4 kJ/m² | 2.5 kJ/m² | 1.1 kJ/m² |
| Layer Strength (Bending Strength – Z) | 24 MPa | 15 MPa | 15 MPa |
Ultra-lightweight, Controllable Density
Only 50%–75% the density of regular ASA prints, ASA Aero is as light as a feather and is designed for weight-sensitive objects, such as RC planes and unmanned aerial vehicles (UAVs). With its controllable foaming characteristics, ASA Aero achieves a lower print density by increasing the printing temperature or lowering the flow rate.
The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.
| Parameter Setting | Average Density | |
|---|---|---|
| Printing Temperature | Increases ↗ | Decreases ↘ |
| Printing Speed | Increases ↗ | Stable or Increases ↗ |
| Flow Rate Ratio | Increases ↗ | Increases ↗ |
| Model Size | Increases ↗ | Decreases ↘ |
| Wall Thickness (Wall Loops) | Increases ↗ | Increases ↗ |
| Infill Density | Increases ↗ | Increases ↗ |
The relationship between maximum foaming rate, minimum print density and printing temperature of ASA Aero. Specimen test: 0.4 mm nozzle, 80 mm/s printing speed and 80 × 10 × 4 mm³ model size (XY direction). The actual required flow-rate ratio and final model density may vary between models.
| Printing Temperature | Minimum Flow Rate Ratio | Maximum Volumetric Expansion Ratio | Maximum Foaming Rate | Minimum Print Density |
|---|---|---|---|---|
| 220 °C | ~ 0.93 | ~ 100% | ~ 0% | ~ 0.97 g/cm³ |
| 230 °C | 0.90 | 106% | 6% | 0.92 g/cm³ |
| 240 °C | 0.74 | 128% | 28% | 0.78 g/cm³ |
| 250 °C | 0.60 | 158% | 58% | 0.61 g/cm³ |
| 260 °C | 0.51 | 186% | 86% | 0.52 g/cm³ |
| 270 °C | 0.45 | 211% | 111% | 0.46 g/cm³ |
| 280 °C | 0.44 | 216% | 116% | 0.45 g/cm³ |
Ready for Harsh Environments & Outdoor Use
Compared with PLA Aero, its outstanding temperature, water and UV resistance makes ASA Aero suitable for long-lasting outdoor use and harsh environments.
| Bambu PLA Aero | Bambu PLA Basic | Bambu ASA Aero | Bambu ASA | |
|---|---|---|---|---|
| Heat Deflection Temperature / °C (0.45 MPa) | 53 °C | 57 °C | 85 °C | 100 °C |
Matte Finish for Easy Coloring
Bambu ASA Aero provides an easy-to-color matte surface texture with better dyeing results compared with regular ASA.
Parameters Comparison
| Bambu ASA | Bambu ASA Aero | Bambu PLA Aero | |
|---|---|---|---|
| Printing Temperature | 240–270 °C | 240–280 °C | 210–260 °C |
| Printing Speed | < 250 mm/s | < 150 mm/s | < 180 mm/s |
| Flow Rate Ratio | 0.93–0.97 | 0.45–0.80 | 0.5–0.8 |
| Filament Density | 1.05 g/cm³ | 0.99 g/cm³ | 1.21 g/cm³ |
| Foaming Rate | – | 0–110% | 0–120% |
| Volumetric Expansion Ratio | 102% | 100%–210% | 100%–220% |
| Print Density | 1.03 g/cm³ | 0.46–0.97 g/cm³ | 0.55–1.05 g/cm³ |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through the AMS (Automatic Material System).
Downloads
Printing Tips
1. Accessory Compatibility
Not compatible with Cool Plate SuperTack, Hotend with Hardened Steel Nozzle 0.6 mm / 0.8 mm, or Hotend with Stainless Steel Nozzle 0.2 mm.
2. Drying Recommendations
ASA Aero is highly sensitive to humidity. For optimal printing performance, dry the filament before use and after storage. See the filament drying instructions.
3. Warping Prevention Tips
To minimize warping, avoid large models with high infill density. Use an enclosed printer, apply glue properly to the build plate, and use a lower printing speed and higher heatbed temperature. See common print-quality problems and solutions.
4. Ventilation & Odor Notice
Pungent and unpleasant odors may be released during printing. Place the printer in a well-ventilated area and use an enclosed printer.
5. Usage Tips
Foaming ASA materials require thorough drying and careful parameter settings. Read the ASA Aero Printing Guide before printing.
Additional information
| Weight | 1,5 kg |
|---|
















