Phrozen TR250 High Temp Resin

94,90 ME ΦΠΑ


Ποιοτική engineering high temp ρητίνη για τον Phrozen Shuffle LCD 3D Printer αλλά και όλους τους υπόλοιπους LCD 3D εκτυπωτές της αγοράς. Έχει σκούρο γκρι χρώμα, πολύ ομαλό φινίρισμα, καλή συγκράτηση λεπτομερειών, βάφεται και επεξεργάζεται εύκολα. To κύριο χαρακτηριστικό της είναι η αντοχή της σε υψηλές θερμοκρασίες >150C

  • Volume: 1000g per bottle
  • XY Planar Resolution: 0.050 mm
  • Z Resolution (Layer Height): 30-100um
  • Normal layer time: 15 sec @ 50 um
  • Property:  High hardness, toughness and resolution.
  • Way to Rinse:Clean with alcohol spray with air gun
  • Suitable for: LCD 3D Printer
  • Application: General modeling & prototyping
Κατηγορία: Ετικέτα:


Specification & Performance

  • Weight: 1000g per bottle
  • Color: Deep Gray
  • XY Resolution: 0.047 mm
  • Layer Height / Parameter: 15 sec @ 50 um, Delay 3
  • Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
  • Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
  • Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
  • Key Performance:
    • Viscosity: 61 mPa.S (25C)
    • Density: 1.10 g / cm3
    • Tensile Stress (Break): 68 MPa
    • Elongation: 8.5%
    • Tensile Modulus: 1050 MPa
    • Hardness: Shore 80D
    • Heat Deflection Temperature @0.45MPa: > 150C

About Resin Operation

    • Avoid sun light exposure.
  • After printing, stored used resin in closed and opaque bottle. ​
  • DO NOT mix fresh resin and used resin.
  • Shake or stir resin properly to avoid pigment separation.
  • ​DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Recommendation

    • ​Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
  • ​DO NOT swallow resin. Go to hospital if you do it.
  • ​Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
  • Resin might cause slight skin irritation. Stop using it if allergy occurred.
  • Resin smells. We strongly suggest you to use it under ventilated condition.
  • Keep resin in room temperature(15 – 35 Celsius) and dry condition.
  • Keep resin away from kid.


Επιπρόσθετες Πληροφορίες


Resin Type

Resin Brand