High-performance printing system

The printer is equipped with two heads specifically designed for large-scale production. The first head is a high-performance one, uses two extruders that have connected filament mixing tank Thanks to this, we can print at high speed, processing up to 0.5 kg of material per hour. The second head is an auxiliary one and has a single extruder, which is used to produce support structures or models requiring higher accuracy.

Filament case with dehumidifying containers

While designing  a large-format 3D printer, it was important to assure the uninterrupted operation, which is the basic principle for long large-format prints. A filament case was created, which can hold 3 spools of filament, each up to 10 kg in weight. This solution guarantees long-term printing and continuous work  without the need to replace materials. Additionally, the filaments are located in containers with dehumidifiers to limit the absorption of moisture from the air, which guarantees stability of their properties.

Magnetic drive

The head movement in the X and Y axes is performed by a magnetic linear drive with an absolute encoder. This drive guarantees higher speeds, acceleration and more accurate positioning. It has no mechanical parts that can be damaged. The encoder allows continuous reading of the position in which the head is located, so there is no material displacement in the printer and each subsequent layer is always applied in the right place.

Intelligent machine control systems

The printer is equipped with intelligent control systems that allow the user to react quickly to problems that may arise. In case of power failure, the user can resume the printing process, which in case of prints lasting several days guarantees stability and uninterrupted production. The device is also equipped with a sensor of lack of filament flow, preventing sudden interruption of the printout, as well as a sensor for measuring the weight of the filament, allowing to predict the quantity of material needed to print the prepared model. Besides, the device is equipped with automatic nozzle height calibration, semi-automatic bedlevelling, semi-automatic filament exchange and automatic levelling of the XY frame.

Thermally insulated, heated chamber

Maintaining a stable environment inside the printer’s working chamber is a key function that impacts on the material used for printing. Thanks to the constant temperature in the printed model there is no processing shrinkage, causing delamination of the layers and adhesion of the model to the bed is improved.

Side printhead: 0.5mm, 1mm, 1.5mm

*for printouts with limited geometry

(width x depth x height)